What is Advantage of cnc plasma cutting machine?
cnc portable Plasma cutter can cut all kinds of metals which are difficult to cut by oxygen, especially for non-ferrous metals (stainless steel, aluminum, copper, titanium and nickel). The main advantages of plasma cutter are that when cutting metal with small thickness, plasma cutting speed is fast, especially when cutting ordinary carbon steel sheet, the speed can reach 5-6 times of oxygen gas cutting method The cutting surface is smooth, the heat deformation is small.its works beatiful.
In the development of plasma cutter, the working gas (working gas is the conductive medium of plasma arc and also the heat carrier, and the molten metal in the cut-out) has obvious influence on the cutting characteristics, cutting quality and speed of plasma arc. The commonly used plasma arc working gases are argon, hydrogen, nitrogen, oxygen, air, water vapor and some mixed gases...Plus its Automatic controller and its height controller is automatic so its very little harmful to human body.
Ask The professionals to cut off power supply when maintain the plasma cutting machine
1. Do not use and store the cutting machine in strong sunlight. 2. Do not use or store the cutting machine in a humid environment. 3. When the cutting machine is in use, its ventilation holes shall not be blocked. 4. The cutting machine should be used and stored in a well-ventilated environment. 5. Open the housing case at least once a year and clean the dust and metal chips inside the machine with dry compressed air. 6. Check regularly whether all cable insulation skins of the cutter are damaged, and wrap or replace the cable if damage is found. 7. Check regularly whether there is any loose part in all electric connection parts, and fasten the loose part. 8. Regularly release the water and impurities accumulated in the filter pressure reducing valve
