With several flame torches equipped, strips flame cutting machine is characterized of stable running and high effi ciency, can be widely applied for strips cutting of carbon steel, manganese steel and other materials.Multi-cutting torches and CNC heterotypic torch system can be customized accordingly, also, automatic height adjusting system.
Multihead straight strip cnc cutting machine
Carbon steel,manganese steel and other materialsCutting thickness
AC servo motor
The beam adopts Germany Messer technology; gantry type frame, eliminate the structural torsional moment better, beam is box type structure, not rectangular tube steel, after welding, use annealing treatment to eliminate internal stress, the deformation does not occur in the years of use
Cutting torch lifting rack for torch automatic lifting.
The mechanical transmission system is through precision rolling bearings and the meshing of class 7 precision gears and racks.
The drive system adopts planetary reducer, the input /output error is only 16 minute of arc, at the same time, in the transverse/ longitudinal gear transmission structure, increases the device of automatic compensation gap, so that the transmission structure can accurately perform the directives issued by the Cnc system.
Drive end beam: longitudinal rail clamping device adopts automatic guiding structure, not the eccentric wheel clamping structure, by the spring force of the automatic guide structure, making it steady running on two tracks, no clamping wheel tight, partial loose phenomenon, its leverage ratio is 1:3.
All equipment spare parts are of black, electroplating and other surface treatment.
Machine is sand blasting and primer spray, face paint using orange peel paint, color is blue or yellow.
|No.||Model 3000mmx12000mm||one set cnc plasma cutting torch +one set cnc flame cuttting torch +6 sets of Non-cnc flame cutting torch|
|1||X axis working area||3000mm|
|2||Y Axis working area||12000mm|
|3||Cutting Mode||PLASMA and Oxygen|
|4||Driving and motor||stepper motor and leadshine drive 860H|
|5||Oxygen system||one set cnc flame cutter+6 set of No-cnc flame cutter|
|6||Plasma power||china brand LGK300A|
|7||cutting thickness from Plasma||20mm-35mm|
|8||cutting thickness from oxygen||40mm-100mm|
|9||cutting torch||one set of cnc plasma torch|
|10||Height controller(Automatic)||FANGLING T.H.C controller|
|11||Controller system||one set of BEIJING START|
|12||Software||one set of FASTCAM|
|13||Power Source||Three phase AC380V|
|14||electrodes and cutting nozzles||5 Sets|
|16||Linear guide||24 Kgs rails|
|18||Attachment parts||without Rotary Axis|
|19||With Flame cutting system|
|20||without Drilling heads|
|21||without Air compressing machine|